Line Tag Issue

[scott.dennisjr]

This is a strange one to me never had this happen before. 

Basically in one of my projects ( just the one so far ) there are a number of line tags assigned for P&IDs, they show up in the properties dialog box & in the Line List Data Manager and yet when I right click to Assign Tag to change or view it only shows the Size and Spec; Pipe Line Group Service & Pipe Line Group Line Number are blank even though those values were previously assigned. So far it seems to be true for every line in this project. Any one else seen this before? 

The off page connectors still continue to function ( fortunately ). 

[h_eger]

@scott.dennisjr ,

You can try using the command"PLANTREFRESHACQPROPERTY" to update the allocations again.
If this does not work, there may be a problem with the connection between the P&ID and the database.

If this is the case, we will have to talk again about repair measures.

[MarkusRufflar · Accepted solution]

Plantaudit, PnPLocaldatapurcher executed already?

You can try to use the PnPTagRebuilder as well.

https://www.autodesk.de/support/technical/article/caas/sfdcarticles/sfdcarticles/DEU/How-to-update-t...

[scott.dennisjr]

I tried the command "PLANTREFRESHACQPROPERTY" with just one drawing ( as all drawings in the project are affected ). It didn't seem to work I saved the drawing, closed the application and reopened and was still the same. I think you are right in regards to it being a problem with the connection between the database and the program as I was working at a remote work site when the problem initially occurred (on wifi connection). I will not be back in the office until 10/21/24 so I will try again when I am back on the ethernet direct connection.

[scott.dennisjr]

PnPLocaldatapurger.exe successfully solved the problem thank you!