Isometrics of valves with operators

[pandrijauskas]

Hello,

I've been generating isometrics, but in the drawings the valve operator is not shown. I use default operators 

@DVaquand has an excellent post about skeys, but for me it doesn't work:

https://forums.autodesk.com/t5/autocad-plant-3d-forum/control-valve-handle-isn-t-appear-on-iso-what-...

I've created a new project and every file is default.

I understant the assignment of actuators to valves in isometric drawings is controlled by the SKEY and the mappings defined in the IsoSkeyAcadBlockMap.xml file, but I can't figure out how to add that operator so it is presented in the isometric drawings as well.

I use default valves with skeys changed 

Selected operators are also default

[h_eger · Accepted solution]

@pandrijauskas ,

with custom parts, the actuators are unfortunately NOT written to the link table of Plant 3D and therefore no actuators are displayed on the iso.
This is NOT an error but intended by the development department!

[pandrijauskas]

Thank you @h_eger . Got it. I thought if valves skeys were already in the library by default, they should be linked with operators and displayed.