Custom supports issies

[popovUS9BY]

Hello Colleagues,

I have custom fixed/point/anchor support.

It is connected to the pipe but does not appear properly in ISO sketch - missing in BOM also there is no dimensions for the support.

What I must do to repair this component?

mmm.PNGmmmm6.PNG

Regards

[h_eger]

@popovUS9BY ,

Is the fixed point support block based or created with a python script?

How was the fixed point support brought into your model from the support spec or plantpipesupportconvert?

[popovUS9BY]

Hello H.eger,

thanks for your reply.

Support is block based.

File with support is attached.

Is there also option in ISO sketches fixes supports and sliding supports to have different symbols?

Regards

[h_eger · Accepted solution]

@popovUS9BY 

Block-based supports have no dimensioning data - where from?

The SKEY is decisive which symbols appear on the iso see page 19

https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://help.autodesk.com/sfdcarti...

[popovUS9BY]

Hello H.eger,

thanks for reply.

Command "plantconvert...something" is used.

There is insertion point.

plantblah.PNG

I'll try to help myself anyhow.

Regards

[popovUS9BY]

It can be done, but takes time ...

For colleagues on site supports are important and since supports are hundreds they must be simple, effective and fast for production.

SUPPORT.PNGRRRR.PNG