Line Types

[Anonymous]

Hi, when I try to edit a style for sewer, drainage
or water lines my linetype do not show up in the patter pull down
(evan though they are in the drawing). Is there a was to use my complex line
types?

--
Thanks, Joe

Joseph D. Bouza, P.E. (one of 'THOSE' People)
Civil 3D 2008
Win XP
pro
v 2002, sp 2
hp workstation xw4600
Intel Core Duo CPU
E7200
@2.53 GHz
3 GB RAM
NIVDIA Quadro FX 1700
(512MB)
==============================
"All Contours are Lies! "-(
AJ)
===========================
The mantra of a former Flamer:
If you
are forced to eat an Elephant, don’t complain about it; Take one bite at a
time.
*****************************************************************************************
In
memory of the King of Work-arounds
"The only Constant is Change".

"The only thing worse than training your staff, and having them leave is
-
not training your staff, and having them stay." 😮
A reminder taken
from Graphics Solution Providers' Calendar
page
*****************************************************************************************
"An
Equal Opportunity Annoyer" (DK)

[Anonymous]

With FDO data connect?

Short answer, not at the users level.

--

Murph

href="http://map3d.wordpress.com/">http://map3d.wordpress.com/

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"Joe Bouza" <
href="mailto:jbouza@cameronengineering.com">jbouza@cameronengineering.com>
wrote in message
href="news:6286496@discussion.autodesk.com">news:6286496@discussion.autodesk.com...

Hi, when I try to edit a style for sewer,
drainage or water lines my linetype do not show up in the patter
pull down (evan though they are in the drawing). Is there a was to use my
complex line types?

--
Thanks, Joe

Joseph D. Bouza, P.E. (one of 'THOSE' People)
Civil 3D 2008
Win XP
pro
v 2002, sp 2
hp workstation xw4600
Intel Core Duo CPU
E7200
@2.53 GHz
3 GB RAM
NIVDIA Quadro FX 1700
(512MB)
==============================
"All Contours are Lies! "-(
AJ)
===========================
The mantra of a former Flamer:
If you
are forced to eat an Elephant, don’t complain about it; Take one bite at a
time.
*****************************************************************************************
In
memory of the King of Work-arounds
"The only Constant is Change".

"The only thing worse than training your staff, and having them leave is
-
not training your staff, and having them stay." 😮
A reminder taken
from Graphics Solution Providers' Calendar
page
*****************************************************************************************
"An
Equal Opportunity Annoyer" (DK)

[tmullins]

Murph,

Could you give us the long answer?

I'm curious. I push for our users to use FDO but this may be what they consider a limitation.

Thanks.

[Anonymous]

First it requires you to enable Enhanced Stylization, a registry edit.
Second you need to save the connection to a .layer file.
Third you need to open the .layer file and edit it.
Fourth none of it is documented for Map3D it's all for Map Guide but works
with Map3D. There is no users interface to do it..

I may blog about it after the first of the year.

--

Murph
http://map3d.wordpress.com/


"tmullins" wrote in message news:6308767@discussion.autodesk.com...
Murph,

Could you give us the long answer?

I'm curious. I push for our users to use FDO but this may be what they
consider a limitation.

Thanks.

[tmullins]

That would be great, Murph.

Seems like a pretty basic task that has been made a tad more complex for some reason.