Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

Counting solar modules

mota_andrefilipe
Enthusiast

Counting solar modules

mota_andrefilipe
Enthusiast
Enthusiast

Hello,

 

Can someone help me, please? I'm wondering if there is a way to count the inserted blocks in the drawing after array them.

 

What happens is that I draw a solar module and then I make it as a block so I can easily count them later. Then, I array them and create a solar modules table with, lets say, 90 modules. And then I keep arraying those tables to fill the field with tables.

 

Later, when I want to count all the individual solar modules of all the tables in the field, I explode those tables and make a BCOUNT command. 

 

The problem is that some solar modules keep their block property after exploding and some don't, which leads to an inacurate count of only the solar modules that kept their block property.

 

The question is how can I count the solar modules after keeping array them?

 

Thanks

0 Likes
Reply
Accepted solutions (1)
888 Views
2 Replies
Replies (2)

Pointdump
Mentor
Mentor
Accepted solution

Andre,
Use BURST instead of EXPLODE.
Dave

Dave Stoll
Las Vegas, Nevada

EESignature

64GB DDR4 2400MHz ECC SoDIMM / 1TB SSD
NVIDIA Quadro P5000 16GB
Windows 10 Pro 64 / Civil 3D 2024
0 Likes

mota_andrefilipe
Enthusiast
Enthusiast

Yap, that's it. Thank you very much.

0 Likes