Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
In my full version of AutoCAD 2000 if i used the undo command having previously used zoom it would ignore the zoom and o back to the last command
eg.
it would undo just the pline and ignore the zoom command. in lt 2002 everytime i press undo it undoes the zoom command aswell.
Is this a system variable that i can switch off.
any help wouold be much appreciated.
"richies6662" wrote in message
news:f19f85a.-1@WebX.maYIadrTaRb...
> In my full version of AutoCAD 2000 if i used the undo command having
previously used zoom it would ignore the zoom and o back to the last command
that's a very unusual version of AutoCAD 2000. The UNDO
command in AutoCAD undoes everything except file writes. That includes changes
in the display. -- David Byrnes/Vancouver BC Assistant Moderator -
AutoDesk Discussion Forums
In
my full version of AutoCAD 2000 if i used the undo command having previously
used zoom it would ignore the zoom and o back to the last command
eg. <zoom> <pline>
it would undo just the pline and ignore the zoom command. in lt 2002
everytime i press undo it undoes the zoom command aswell. Is this a system
variable that i can switch off. any help wouold be much
appreciated.
richie,,,, you are correct. I've used a 2000 version that undo and ignores all the zoom in and outs... and now I use 2005 Lt that don't ignores the zooms. and that why I'm here. trying to find a cure... I like version 2000
From what I can gather nothing much can be done about it.
2008 offers no relief.
Regards Gary.
www.ltfactory.com
wrote in message news:5800892@discussion.autodesk.com...
richie,,,, you are correct. I've used a 2000 version that undo and ignores
all the zoom in and outs... and now I use 2005 Lt that don't ignores the
zooms. and that why I'm here. trying to find a cure... I like version 2000
