Hatch pick point

[KADRİ.ARABALİ]

Actually this not a question ! I use Autocad since 1996. Autodesk must completely delete hatch command from program and design it again from zero point. İt is getting worst. I hate drawing, when I have to hatch. Blocks problem, splines problem, texts problem, dimensions problem. İt never works properly. And Autodesk  can not do anything about it. As a result we users can not 'pick point' !

[pendean]

You can tell Autodesk all about it here https://www.autodesk.com/company/contact-us/product-feedback

We are all just end users like you, all you are doing here is shouting in a public park and getting stares from passers by.

Good luck.

[steven-g]

If you just want to rant then maybe start a youtube channel!. Personally I have never had problems with the hatch command, if you have some definite examples and can share a drawing then maybe someone could help find where your issues are.

[rkmcswain]

@KADRİ.ARABALİ - you'll save time in the long run if you'll create a closed object _first_ and then select that object to hatch. Always been this way.

[KADRİ.ARABALİ]

This is what I say. Why on earth I have to do that? İf it does not work why there is a choice '' pick point ''

[KADRİ.ARABALİ]

I watch videos. I say it should be much more simple. When you use pick point program show you (sometimes) where to close. İt should be easy. Because requirement is very simple. 

[KADRİ.ARABALİ]

Thanks, I did it.

[rkmcswain]

@KADRİ.ARABALİ wrote:

This is what I say. Why on earth I have to do that? İf it does not work why there is a choice '' pick point ''

Because, like other things in life over which you have no control, you can fight it and complain about it, or you can just use a workaround and move on with life/work. 

Providing that feedback to Autodesk is good, but we've been doing that for a couple of decades now, so I wouldn't expect any changes soon.

@KADRİ.ARABALİ 

[KADRİ.ARABALİ]

So, you want me keep quiet. I was expecting people would say o yes me too with problem with it. You can not use one of most important command and simply accepted this situation. I would support me if I were you. İnteresting !

[rkmcswain]

@KADRİ.ARABALİ - No, what I said was "we've been doing that for a couple of decades now", and it has not resulted in any changes.  

[steven-g]

---

@KADRİ.ARABALİ wrote:

So, you want me keep quiet.

---

Not at all, rant all you want it serves no purpose, I personally couldn't care less, but everyone here, is a user, and we answer here to try and help people get the results they need, or a workaround if they cannot get exactly what they are hoping for. So post an example and maybe someone could suggest a method to help you get the hatch command working.

Or don't, it's fun watching people bash their heads on a brick wall.

[KADRİ.ARABALİ]

I do not want to  do unnecessary things to solve software developers stupid mistakes. I know how to use it. But it should be improved. It has to be much more easy. İt is not user friendly. I pass over this wall everyday and fed up.

İf you are happy with it you can go on. 

[pendean]

You can tell Autodesk all about it here https://www.autodesk.com/company/contact-us/product-feedback