Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Write Vertical Curve Data near to curve

arshadmirza786
Collaborator

Write Vertical Curve Data near to curve

arshadmirza786
Collaborator
Collaborator

I Hope one should help to write a lisp for vertical curve data in a table near to each curve with curve sr #

 

Thanks

0 Me gusta
Responder
543 Vistas
9 Respuestas
Respuestas (9)

Pointdump
Mentor
Mentor

Hi Arshad,


Profile.png

 

No need for LISP. You can EXPLODE that Polyline and use DATAEXTRACTION to create a Table, Excel File, or CSV File. CSV File Attached.
Dave

Dave Stoll
Las Vegas, Nevada

EESignature

64GB DDR4 2400MHz ECC SoDIMM / 1TB SSD
NVIDIA Quadro P5000 16GB
Windows 10 Pro 64 / Civil 3D 2024
0 Me gusta

arshadmirza786
Collaborator
Collaborator

Thank you for this suggestion

 

I think we write the +ve & -ve grade too and PVI etc for vertical curves

0 Me gusta

Pointdump
Mentor
Mentor

Arshad,
"...+ve & -ve grade too and PVI etc..."
Then you'll need to do this with Civil 3D. There you can label each vertical curve.
Dave

Dave Stoll
Las Vegas, Nevada

EESignature

64GB DDR4 2400MHz ECC SoDIMM / 1TB SSD
NVIDIA Quadro P5000 16GB
Windows 10 Pro 64 / Civil 3D 2024
0 Me gusta

arshadmirza786
Collaborator
Collaborator

How to convert this pline in C3D vertical curve profile ???

0 Me gusta

Pointdump
Mentor
Mentor

Arshad,
In civil 3D you'll need a Surface and an Alignment before you can create a Vertical Profile. So you might be better off in Vanila AutoCAD using a Table at each curve, like you originally asked. About LISP's I know very little. You can check the >>>Autodesk App Store<<<.
Dave

Dave Stoll
Las Vegas, Nevada

EESignature

64GB DDR4 2400MHz ECC SoDIMM / 1TB SSD
NVIDIA Quadro P5000 16GB
Windows 10 Pro 64 / Civil 3D 2024
0 Me gusta

arshadmirza786
Collaborator
Collaborator

Yes I have only this pline to write the vertical curve data nothing more

0 Me gusta

arshadmirza786
Collaborator
Collaborator

As per my search Nothing about " CURVE " at this store

0 Me gusta

arshadmirza786
Collaborator
Collaborator

# dlanorh May I disturb you, I hope you will help me for this topic as usual 

Now the problem is for Vertical Curve and following in formation or more be added to a curve

 

VERTICAL CURVE #

BIGNNING OF VERTICAL CURVE STATION = BVCS
BIGNNING OF VERTICAL CURVE ELEVATION = BVCE
= PVI STA
= PVI ELEV
= K
= LVC
END OF VERTICAL CURVE STATION = BVCS
END OF VERTICAL CURVE ELEVATION = BVCE
GRADE UP TO BEGINNING OF CURVE = +VE% OR -VE%
GRADE AFTER END OF CURVE = +VE% OR -VE%

For more guide lines pls refer to
https://www.mathalino.com/reviewer/surveying-and-transportation-engineering/parabolic-curve

 

I hope you will manage some piece of time for me / in this regard

 

0 Me gusta

arshadmirza786
Collaborator
Collaborator
0 Me gusta