Text and dimension in Shade of grey visua style

[Anonymous]

Hi everyone, 

I have a bit of a dilemma in the paper space. 

The dimensions and text are in the model space, and the text and dimensions "appears empty " when I use shade of grey style. If now I use 2d wireframe style, the text is fine but then my object is totaly black instead of grey.

Is there a way of getting both text and object ok. I knoz the proper way is to put the dimensions in the paperspace. But those plans were made by someone else and he put all the dimensions in the model space. I don't want to go to the trouble of changing every single dimension since I have a whole batch of plan to work at.

Many thanks in advance for your attention.

[imadHabash · Accepted solution]

Hi,

as shown below you can edit and modify your current visual style . pick inside your VP then type VISUALSTYLES command , select your current visual style ( shades of grey ) and change color to Normal or any other value to notice that your text is full now . 

[Anonymous]

Many thanks for this Imad. Text is now full as you said.