Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Stretch a 3d object from midpoint

Anonymous

Stretch a 3d object from midpoint

Anonymous
No aplicable

I am trying to make the tube longer without changing the ends. Any help would be greatly appreciated.

0 Me gusta
Responder
603 Vistas
6 Respuestas
Respuestas (6)

Alfred.NESWADBA
Consultant
Consultant

Hi,

 

>> trying to make the tube longer

Which type of object is it?

"3D object" is not enough information, it could be a 3D-Solid or some surfaces or a block (or multiple ones)?

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)
0 Me gusta

Anonymous
No aplicable

Thank you for you reply. I have attached a copy of the drawing. It is a 3D Solid.

0 Me gusta

Patchy
Mentor
Mentor

Make a copy, slice a piece of it in the middle, butt them up then union?

pipe.JPG

Anonymous
No aplicable

I was looking for a solution that would allow me to more easily adjust the length rather than having to sum the 3 lengths and line them all up again as I have numerous drawings that are nearly the same but with varying lengths and bores.

0 Me gusta

Patchy
Mentor
Mentor

Some shape can be stretch by holding down the ctrl button, click on the egde and stretch, but some can't.

0 Me gusta

Alfred.NESWADBA
Consultant
Consultant

Hi,

 

>> a solution that would allow me to more easily adjust the length

I would then separate the objects, having a connector object and a pipe. The pipe alone can be modified in length either by using _SOLIDEDIT or by creating a block from that object and modify the block scale value that corresponds to the length.

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)
0 Me gusta