Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Specifying DIM line location

Anonymous

Specifying DIM line location

Anonymous
No aplicable

Problem with DIM and DIMLIN, won't snap on to specified dimension location. Attempted ONSNAP F3, F8 and F11. Annotative visibility was set to 1. Nothing helped. 

0 Me gusta
Responder
766 Vistas
9 Respuestas
Respuestas (9)

ennujozlagam
Mentor
Mentor

have you try to tick any object snap modes from ddosnap. thanks

 

snap.JPG





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Me gusta

Anonymous
No aplicable

It is a solution that I have already tried. 

0 Me gusta

Anonymous
No aplicable
this is something I have already tried and it didn't fix the problem
0 Me gusta

ennujozlagam
Mentor
Mentor

have you try to install latest updates from autodesk and see if helps. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Me gusta

S.Faris
Advisor
Advisor

Post a screenshot of your OSMODE Window.

 

Is this a file specific issue or does this happen even in a newly created file?

SALMANUL FARIS

0 Me gusta

Anonymous
No aplicable
File specific, error might have been caused due to the changes I made to
the DIMSTYLE. I will update autocad and changing the DIMSTYLE to original
state and see if the problem gets fixed. Aswell as get you an image of that
OSMODE in due time.
0 Me gusta

S.Faris
Advisor
Advisor

Try turning ON 3DOSNAP (F4)

SALMANUL FARIS

0 Me gusta

Anonymous
No aplicable
All object snaps are on
0 Me gusta

Alfred.NESWADBA
Consultant
Consultant

Hi,

 

depending on the point on the dimension items where you want to have an object snap working, please start command _OPTIONS ==> Drafting ==> uncheck "Ignore dimension extension lines" ... maybe this is already the solution.

 

20200114_093027_0001.png

 

If that does not help please ...

  • upload your drawing with just one dimension and draw a circle around the point where you can't use the object snap
  • start command _ABOUT and show us a screenshot from this dialog

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)
0 Me gusta