Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Problemas con desorden de las capas en control de capas

Anonymous

Problemas con desorden de las capas en control de capas

Anonymous
No aplicable

Buenas soy dibujante en arqueologia, y tengo un problema con las capas ya que cuando tengo mas de 1000 capas el control de capa las desordena, alguien sabe un comando para aumentar el numero de capas?

En arqueologia no es como arquitectura y debemos poner tres capas por estructura o hallazgo, por eso tenemos tantas capas

0 Me gusta
Responder
Soluciones aceptadas (1)
615 Vistas
4 Respuestas
Respuestas (4)

Alfred.NESWADBA
Consultant
Consultant

Hi,

 

can you please describe why more than 1000 layers are handled incorrect?

AutoCAD does not have a layer number limit (at least not at 1000 layers)

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)
0 Me gusta

Anonymous
No aplicable

The clutter appears here in the layer control, the layers do not come out in order, and it happens to me when I have more than 1000capas.jpg

0 Me gusta

Alfred.NESWADBA
Consultant
Consultant
Solución aceptada

Hi,

 

>> the layers do not come out in order

Ok, please change the sysvar (type it into the command line followed by <ENTER>)

MAXSORT

and raise the value you have currently, after that close and restart AutoCAD.

More details about MAXSORT: >>>click<<<

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)

Anonymous
No aplicable

Thank you very much, it is already solved

0 Me gusta