Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I used PASTESPEC to place several .jpg images into my drawing file. Per the instructions for this command, I removed the .jpg files from the project folder. After that, I have opened, worked on and closed the drawing file several times over a few days and the images remained as created. This morning I opened the drawing and the images were gone. Instead I get the attached. Any ideas on what went wrong?
Thanks for helping me get this worked out. Reattached the images using the prescribed procedure using Paint and attaching the meta file instead of the image file. Emailed the drawing to a co-worker who opened it directly from the email and everything was there. Considering problem solved for now. Will post if anything else goes wrong.
