Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Onsanp not working

mthardwick
Participant

Onsanp not working

mthardwick
Participant
Participant

Hello

Snap has just stopped working for me. If I look at the status Snap is turned on looks like it should work. On my screen if I move the cursor around it does not pick up on end points. 

If you could offer some suggestion to rectify that would be great. 

Thanks

Mark

 

0 Me gusta
Responder
Soluciones aceptadas (2)
634 Vistas
11 Respuestas
Respuestas (11)

Alfred.NESWADBA
Consultant
Consultant

Hi,

 

>> On my screen if I move the cursor around it does

>> not pick up on end points.

Which command is active while you move the cursor?
What setting is reported for sysvar OSMODE?

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)
0 Me gusta

mthardwick
Participant
Participant

Hi Alfred

I am trying to use snap for measure or line command - each one the cursor is not coming up to snap. 

If I put OSMODE in the current value is 20719?

Thanks

Mark

0 Me gusta

BeKirra
Advisor
Advisor

I think it is worth try regenall when it happens.

HTH

 

Please mark "Accept as Solution" and "Like" if my reply resolves the issue and it will help when others need helps.
= ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ =
A circle is the locus of a cursor, starting and ending at the same point on a plane in model space or in layout such that its distance from a given coordinates (X,Y) is always constant.
X² + Y² = C²
0 Me gusta

mthardwick
Participant
Participant

Thanks

I tried regenall all but it did not work. 

0 Me gusta

BeKirra
Advisor
Advisor

What if set UCS to "world"?

Please mark "Accept as Solution" and "Like" if my reply resolves the issue and it will help when others need helps.
= ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ =
A circle is the locus of a cursor, starting and ending at the same point on a plane in model space or in layout such that its distance from a given coordinates (X,Y) is always constant.
X² + Y² = C²
0 Me gusta

mthardwick
Participant
Participant

I tired that. Still no luck. 

 

Mark

0 Me gusta

BeKirra
Advisor
Advisor

What if restart AutoCAD?

BTW does it behave with all drawing files?

Edited: Another thought - please try osnapZ

Please mark "Accept as Solution" and "Like" if my reply resolves the issue and it will help when others need helps.
= ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ =
A circle is the locus of a cursor, starting and ending at the same point on a plane in model space or in layout such that its distance from a given coordinates (X,Y) is always constant.
X² + Y² = C²
0 Me gusta

mthardwick
Participant
Participant

Sorry that did not work - onsnapz

I problem occurred yesterday and I shut down compture over night and problem back so I have tired a re-start. 

 

Mark

0 Me gusta

mthardwick
Participant
Participant

I just tried F3, read of an online forum and it worked. Thanks very much for your help. 

Mark

0 Me gusta

Alfred.NESWADBA
Consultant
Consultant
Solución aceptada

Hi,

 

>> If I put OSMODE in the current value is 20719?

OSMODE 20719 means OSNAP is off

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)

BeKirra
Advisor
Advisor
Solución aceptada

You're right. I didn't pay attention to the value OP described.

@mthardwick "osmode" is off when it is set to 16384 or greater.

Please mark "Accept as Solution" and "Like" if my reply resolves the issue and it will help when others need helps.
= ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ = ♪ = ♫ =
A circle is the locus of a cursor, starting and ending at the same point on a plane in model space or in layout such that its distance from a given coordinates (X,Y) is always constant.
X² + Y² = C²
0 Me gusta