Not able to see full screen

[Anonymous]

The screen appears like this when i start my autocad i can not access full screen so please give me solution of this.

[Slawomir_]

Have You tried to press Clean Screen button on the bottom right? (see attached figure)

Press Ctrl+0 or write CLEANSCREENON to do the same.

Is it working?

[TheCADnoob · Accepted solution]

give this a shot and see if it helps: https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/Start-...

[Anonymous]

Thank You for the solution.

Secondary option for primary base i took and it works.

But i am using large screen so in that case the fonts are too small, for that what should i have to do.

[Anonymous]

Dear, 

It is not working but thanks for your suggestion.

[TheCADnoob]

Glad i was able to help. If that post or this help solves you problem mark it as the solution so others can find it in the future. 

As to your other problem, Not sure i understand your problem but if i had to guess you may be using a high resolution monitor. I dont believe there is a fix for this yet. You will have to bring your resolution down below 2000. 

https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/Odd-gr...

[Anonymous]

---

@Anonymous wrote:

Thank You for the solution.

Secondary option for primary base i took and it works.

But i am using large screen so in that case the fonts are too small, for that what should i have to do.

---

Since you are a student, go grab 2017.1.  That's 2017 POINT 1.  That is pretty much the fix for really high res monitors.