Nav cube is visible, but unclickable

[CameroneMKEC]

My nav cube is visible in the upper right corner, but I can't click on any part of it.  I've tried turning it off/on.  It seems to be specific to this dwg, as others I've opened have working nav cubes.  Anyone know what's going on?

I'm using AutoCAD 2013.

Thanks!

[wispoxy]

Applies to AutoCAD 2013, AutoCAD 2014, AutoCAD 2015, AutoCAD 2016, AutoCAD Architecture 2013, AutoCAD Architecture 2014, AutoCAD Architecture 2015, AutoCAD Architecture 2016, AutoCAD Civil 3D 2013, AutoCAD Civil 3D 2014, AutoCAD Civil 3D 2015, AutoCAD Civil 3D 2016, AutoCAD Electrical 2013, AutoCAD Electrical 2014, AutoCAD Electrical 2015, ...

   

Issue: After working some time in a drawing the ViewCube does not work anymore. It is still visible but cannot used anymore.

Causes: The error may be related to an unsupported or an old graphic card driver installed on the system.

Solution: The following actions may reduce the frequency of this error:

• Get Recommended Driver from Autodesk: Go to the Find Recommended Hardware site and download/install the recommended and certified graphics driver for your card.
  • This is the best choice. The listed graphic cards and the listed drivers are tested for Autodesk products. So whenever possible use a recommended and certified graphic card and driver from this site.

 

• Get Latest Driver from Vendor: If the graphic card and driver is not listed, please go to the graphic card vendor site and update to the latest graphics driver that they provide

 

• Adjust Hardware Settings: If you cannot update the graphic card driver to a newer version, please try to turn off hardware acceleration in the "Options" dialog

Article ID: kA230000000eUql