Model Space Objects / Text and Other ItemsNOT appearing correctly in Paper Space

[jon]

We are having a challenge with one particular drawing. We have one viewport created in paper space. When viewing the paper space layout tab, some objects, text, callouts and other items are not displaying correctly. This includes simple items such lines being incorrectly displayed. When you view model space through the layout tab these objects appear in different locations than where they are actually located in the model tab. Any suggestions on what might be going on to cause these items to not appear correctly in paper space? Thank you for your time.

[Anonymous]

---

@Anonymous wrote:
We are having a challenge with one particular drawing. We have one viewport created in paper space. When viewing the paper space layout tab, some objects, text, callouts and other items are not displaying correctly. This includes simple items such lines being incorrectly displayed. When you view model space through the layout tab these objects appear in different locations than where they are actually located in the model tab. Any suggestions on what might be going on to cause these items to not appear correctly in paper space? Thank you for your time.

---

Please post your DWG.

[Anonymous]

Maybe they look correct in model space but the objects may have a Z coordinate. 

Try to use 3DOrbit in model space and see if they now are not in the same plane as the other objects.

If so, you might be able to try "Flatten" to bring them back to a zero Z coordinate (Not sure if this will work for your situation)

Ron

[john.vellek]

Good morning jon,

Were you able to resolve the model space view or do you need additional assistance?  Please add your drawing file to this thread so we can take a quick look in order to resolve the issue.

[RobDraw]

It sounds like annotative scaling may be at play here.