Announcements

Starting in December, we will archive content from the community that is 10 years and older. This FAQ provides more information.

Community
AutoCAD Forum
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

iso-dashed arc doesn't print if the block is in cm then scaled to meters

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
boicottms
448 Views, 2 Replies

iso-dashed arc doesn't print if the block is in cm then scaled to meters

Hi,

I have some doors blocks created in cm, on layer 0, all byblock except the opening arc and ending position of the leaf that are ACAD_ISO02W100.
When I insert (and scale) them in a drawing in meters, the iso-dashed lines are all visible, but when I print it the dashed arcs are not printed in the pdf (the lines are!). What the hell is happening?

Note: all the dashed elements are in the same layer, with the same dash scale, I also managed to print an ellipse's arc but not the standard arcs!

boicottms_0-1586533585072.png

acad screenshot

boicottms_1-1586533615731.png

outputted pdf screenshot.

Bug? Please help!

acad 2019.1.1 on win 10

Tags (3)
2 REPLIES 2
Message 2 of 3
sophia_lee
in reply to: boicottms

HI @boicottms , 

 

I have tested your file from AutoCAD 2019.1.2 and 2020.1.2 and couldn't reproduce the problem. please try below steps and see if this helps. 

 

 

Hope this is helpful. kindly 'Accept as solution' if this helps. Thank you, 


Sophia Lee
Global Product Support Specialist
Message 3 of 3
imadHabash
in reply to: boicottms

Hi,

i test your drawing and there is NO problem !!! i suggest to change your DWG To PDF.pc3 by the attached one . 

Imad Habash

EESignature

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

AutoCAD Inside the Factory


Autodesk Design & Make Report