iso-dashed arc doesn't print if the block is in cm then scaled to meters

[boicottms]

Hi,

I have some doors blocks created in cm, on layer 0, all byblock except the opening arc and ending position of the leaf that are ACAD_ISO02W100.
When I insert (and scale) them in a drawing in meters, the iso-dashed lines are all visible, but when I print it the dashed arcs are not printed in the pdf (the lines are!). What the hell is happening?

Note: all the dashed elements are in the same layer, with the same dash scale, I also managed to print an ellipse's arc but not the standard arcs!

acad screenshot

outputted pdf screenshot.

Bug? Please help!

acad 2019.1.1 on win 10

[sophia_lee · Accepted solution]

HI @boicottms , 

I have tested your file from AutoCAD 2019.1.2 and 2020.1.2 and couldn't reproduce the problem. please try below steps and see if this helps. 

• Update Adobe Acrobat reader.  
• Update AutoCAD 2019.1.2.
• Copy the block and paste in a new drawing > Plot. 

Hope this is helpful. kindly 'Accept as solution' if this helps. Thank you, 

[imadHabash · Accepted solution]

Hi,

i test your drawing and there is NO problem !!! i suggest to change your DWG To PDF.pc3 by the attached one .