Community

Hatch problem, everything is shown as lines

Hatch problem, everything is shown as lines

Anonymous
Not applicable
482 Views
1 Reply
Message 1 of 2

Hatch problem, everything is shown as lines

Anonymous
Not applicable
‎08-22-2020 12:18 PM

Hello, I have the 2020 student version and I opened a file and everything that was filled with a pattern hatch now looks like lines from one side to another. Model and Layout looks the same... All my files have now the same issue. Tried REGEN and creating new files but did not work.

Thanks in advance!

1.JPG

0 Likes
Like
Report
Accepted solutions (1)
Solution 1
483 Views
1 Reply
Reply (1)
Message 2 of 2

vinodkl
Mentor
Mentor
‎08-24-2020 01:22 AM
Accepted solution

Hi,

 

Type in the command "LINESMOOTHING" and turn it "OFF" and see if this fixes your issue.

--------------------------------------------------------------------------------------------------------------------------
ವಿನೋದ್ ಕೆ ಎಲ್( System Design Engineer)
Likes is much appreciated if the information I have shared is helpful to you and/or others.

Please mark "Accept as Solution" if my reply resolves the issue or answers your question, to help others in the community.
--------------------------------------------------------------------------------------------------------------------------
0 Likes
Like
Report
Report a website issue