Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Graphics acceleration problem

Anonymous

Graphics acceleration problem

Anonymous
No aplicable

Hi, All,

I am using AutoCAD 2017 with a CAD work station with a NVidia Quadro K3100M Graphics card, after the recent Windows 10 update I discovered that I could not edit blocks, I contacted an old mate and he suggested that the Graphics Acceleration might be the problem and to try turning Hardware Acceleration off as a temporary fix. This has worked however if I leave it off the drawing graphics are jumpy and curves etc faceted. So every time i want to edit (or write) a block I have to turn off the Hardware Acceleration.(GRAPHICSCONFIG). Can anybody offer any light on this and offer some kind of fix.

 

Responder
Soluciones aceptadas (1)
10.151 Vistas
15 Respuestas
Respuestas (15)

john.vellek
Alumni
Alumni

Hi @Anonymous,

 

I see that you are visiting as a new member. Welcome to the Autodesk Community!

 

I looked on nVidia's site and found this to be the current driver for your graphics card. You might try it to see if it improves your performance and block editing issue.

 

Have you also updated your AutoCAD for hotfixes and updates from your account page or Desktop App?

 

Please post your results.

 

 

Please select the Accept as Solution button if my post solves your issue or answers your question.


John Vellek


Join the Autodesk Customer Council - Interact with developers, provide feedback on current and future software releases, and beta test the latest software!

Autodesk Knowledge Network | Autodesk Account | Product Feedback

Anonymous
No aplicable
Sent from Mail for Windows 10
Hi I installed the latest driver as you suggested, It has made no difference at all,
If I try to open a block I get nothing a blank block editor if I turn off the Hardware accelerator then I get the block in the editor.
What are hot fixes and which one would you recommend.
0 Me gusta

john.vellek
Alumni
Alumni

Hi @Anonymous,

 

You can find the Service Pack and Hotfixes here with descriptions on what they are for. You should also check your Autodesk Desktop App or go into your Account Management page to see if you have other updates available.

 

While you pursue that can you also type GRAPHICSCONFIG and send me a screenshot of the window that pops up?

 

 

Please select the Accept as Solution button if my post solves your issue or answers your question.


John Vellek


Join the Autodesk Customer Council - Interact with developers, provide feedback on current and future software releases, and beta test the latest software!

Autodesk Knowledge Network | Autodesk Account | Product Feedback
0 Me gusta

Anonymous
No aplicable
Hi John,
I guess this is what you want

Tim
Sent from Mail for Windows 10
0 Me gusta

Alfred.NESWADBA
Consultant
Consultant

Hi,

 

>> If I try to open a block I get nothing a blank block editor

Just to make sure: is that specific to one drawing or does that also happen when you create a new drawing, draw one line, create a block from that line and open the blockeditor at the end of the block creation.

 

Also an option: reset settings to default >>>click<<<

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)

braudpat
Mentor
Mentor
Hello

Are you running with NVidia FXAA graphic Feature = Off ?

Regards, Patrice
Patrice ( Supporting Troops ) - Autodesk Expert Elite
If you are happy with my answer please mark "Accept as Solution" and if very happy please give me a Kudos (Felicitations) - Thanks

Patrice BRAUD

EESignature


0 Me gusta

Anonymous
No aplicable
Hi Alfred
I have just opened a new drawing, drew 1 line, made it a block, and then opened the block nothing in the block editor, closed the block editor, turned off the Hardware Acceleration, re-opened the block and there it is in the editor as usual, so to answer your question, yes every drawing, every block, every time, unless the hardware acceleration is turned off.
Tim

Sent from Mail for Windows 10
0 Me gusta

Anonymous
No aplicable
Hi Braudpat,
Sorry I haven’t a clue, of even where to find that info. I opened the NVidia Control panel The window says
Version 377.11
Quado K3100M
In the left hand panel are tasks.
3D settings:- Adjust image settings with preview, Manage 3D settings or Set physX configuration.

Display:- Change resolution, Adjust desktop colour settings, Rotate display, View HDCP status, Set up digital audio, Adjust desktop size and position & Set up multiple displays.

Video:- Adjust video colour settings & Adjust video image settings.

Workstation:- View System Topology & Set up mosaic
Where would I find a FXAA Graphic Feature
Tim


Sent from Mail for Windows 10
0 Me gusta

braudpat
Mentor
Mentor

 

Hello from France

 

1) Please look at the Image ...

 It's a French Windows but I am sure you will find the same on your US/English Windows !?

 

2) What is your current resolution in pixels (horizontal x Vertical) ?

 

3) Have you tried to run with: HQGEOM = 0 ?

 

4) And maybe : LINEFADING & LINESMOOTHING = ZERO ?

 

Regards, Patrice

 

Patrice ( Supporting Troops ) - Autodesk Expert Elite
If you are happy with my answer please mark "Accept as Solution" and if very happy please give me a Kudos (Felicitations) - Thanks

Patrice BRAUD

EESignature


0 Me gusta

Anonymous
No aplicable
Hi Patrice
Greetings from Sunny England,
Thanks for the image , very easy to find.
Yes the FXAA filter is OFF
Sent from Mail for Windows 10
0 Me gusta

braudpat
Mentor
Mentor

 

Hello

 

OK and for :

 

2) What is your current resolution in pixels (horizontal x Vertical) ?

 

3) Have you tried to run with: HQGEOM = 0 ?

 

4) And maybe : LINEFADING & LINESMOOTHING = ZERO ?

 

Regards, Patrice

 

Patrice ( Supporting Troops ) - Autodesk Expert Elite
If you are happy with my answer please mark "Accept as Solution" and if very happy please give me a Kudos (Felicitations) - Thanks

Patrice BRAUD

EESignature


0 Me gusta

Anonymous
No aplicable

Hi My Resolution is 1680x1050 (Recommended)

I turned off :-  HQGEOM, LINEFADING AND LINESMOOTHING with no difference

Tim

0 Me gusta

Alfred.NESWADBA
Consultant
Consultant
Solución aceptada

Hi,

 

>> yes every drawing, every block, every time, unless the hardware acceleration is turned off.

Have you seen/tried my suggestion of resetting the AutoCAD profile to default?

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)

Anonymous
No aplicable
Hi I have re-set AutoCad Back to default settings and the problem seems to have gone away, the only problem now is I cannot use AutoCAD because I don’t recognise it. New ribbon, everything in a new place and all my custom fly-out palettes have disappeared. I am very glad I saved my previous settings!
So how do I get back to my previous settings and keep the Hardware acceleration on!

Sent from Mail for Windows 10
0 Me gusta

Alfred.NESWADBA
Consultant
Consultant

Hi,

 

>> I have re-set AutoCad Back to default settings and the problem seems to have gone away

Great to know you have it solved now!

 

>> So how do I get back to my previous settings

In the same way you modified the user-interface after your first start.
What ever modifications you did just repeat them.

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)
0 Me gusta