Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Getting rid of line spacing under last line of Mtext

peterK93BS
Contributor

Getting rid of line spacing under last line of Mtext

peterK93BS
Contributor
Contributor

Picture makes it pretty evident I hope. Background mask is all messed up because it takes the whole thing including the line spacing. This is new to me, and cementing further my quest to never use AutoCAD again if I can help it.

 

This is Mtext, the problem is not affected by font, and I can make my problem worse by increasing the line spacing. As you can see, AutoCAD knows that it really shouldn't be behaving like this, it just won't actually do anything about it.

 

Thanks,

Peter

 

peterK93BS_0-1654728964436.png

peterK93BS_1-1654729257969.png

 

 

Responder
Soluciones aceptadas (1)
562 Vistas
9 Respuestas
Respuestas (9)

pendean
Community Legend
Community Legend

>>>....cementing further my quest to never use AutoCAD again if I can help it....<<<
bye bye then :cara_guiñando_un_ojo:

 

But if you stay... without your DWG sample my guess is you need to adjust this?

pendean_2-1654730811587.png

 

pendean_1-1654730754834.png

 

pendean_3-1654730868087.png

 

0 Me gusta

cadffm
Consultant
Consultant

Hi,

 

>>"Picture makes it pretty evident I hope."

Yes, but the additional DWG would be perfect (for some)

 

>>"Background mask is all messed up because it takes the whole thing including the line spacing."

Right.

 

>>"This is new to me"

Not to me

 

>>"and cementing further my quest to never use AutoCAD again if I can help it."

Your choice, take another problem software!

 

>>"AutoCAD knows "

AutoCAD is a software and knows nothing.

 

Topic: "Getting rid of line spacing under last line of Mtext"

I vote for it! Post it to the idea station (of Civil3D for example) or send it as Productfeedback or similar (to AUTODESK)

 

thumbs up

Sebastian

0 Me gusta

cadffm
Consultant
Consultant

@pendean  schrieb:

But if you stay... without your DWG sample my guess is you need to adjust this?


Looks like a MText without line spacing >1 but the TO is talking about Mtexts WITH line spacing >1

!?

Sebastian

pendean
Community Legend
Community Legend
@cadffm Can't be sure, the OP did not try to help himself by posting a DWG sample file with the issue.
0 Me gusta

Kent1Cooper
Consultant
Consultant

It's not doing that for me [Acad2023]:

Kent1Cooper_2-1654777656977.png

Kent Cooper, AIA
0 Me gusta

peterK93BS
Contributor
Contributor

Here's the text in a DWG.

0 Me gusta

Kent1Cooper
Consultant
Consultant

I think that has nothing to do with line spacing, but is for the possibility that the text content could have descenders below the baseline -- it goes to the bottom of those and not beyond:

Kent1Cooper_1-1654783497419.png

Kent Cooper, AIA
0 Me gusta

pendean
Community Legend
Community Legend
Solución aceptada

pendean_0-1654787313054.png

 

peterK93BS
Contributor
Contributor
That does it, sweet!

I have a memory of changing that variable and not seeing anything happen but hey, it works right now and that's what matters.

Thanks for the help!
0 Me gusta