Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Getting a solid loft from uneven profiles?

raybryant1998
Contributor

Getting a solid loft from uneven profiles?

raybryant1998
Contributor
Contributor

I have two surfaces that are slightly curved, but are the same distance apart at every point. I'm wondering if there is anyway to get my loft between these two surfaces to be a solid.

 

Thanks in advance.

 

 

0 Me gusta
Responder
Soluciones aceptadas (1)
742 Vistas
4 Respuestas
Respuestas (4)

imadHabash
Mentor
Mentor

Hi,

>> I'm wondering if there is anyway to get my loft between these two surfaces to be a solid.

you can try THICKEN command and put a proper thickness value . >> Click << 

 

Command: THICKEN
Select surfaces to thicken: 1 found

Select surfaces to thicken: Specify thickness <0.1000>: .05

Imad Habash

EESignature

R_Tweed
Advisor
Advisor
Solución aceptada

Check the attached dwg. I used the following steps.

 

1. surface patch top and bottom open ends

2. sculpt.

schulz8NPAP
Advocate
Advocate

Done in Autocad 2008...

Regards

Jochen

www.black-cad.de

 

 

raybryant1998
Contributor
Contributor

Thank you for the replies. I ended up sculpting the surface using the profile I needed and thickening that surface one inch.

0 Me gusta