Community
AutoCAD Forum
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

German dimension style

3 REPLIES 3
Reply
Message 1 of 4
ahmed4J6T4
219 Views, 3 Replies

German dimension style

Hello,

Does anybody know how to convert my AutoCAD to be using German dimension style? (Normal AutoCAD not AutoCAD architecture)

 

For example: 

1- Making the third number after the decimal to be higher (Superscript)

2- To make a length less than 1 meter to be written as a complete number without friction (eg. 50 cm to be written "50" not "0.50"

 

Please have a look at the attached picture for further elaboration.

 

Thanks in advance!

QQQ.PNG

3 REPLIES 3
Message 2 of 4
cadffm
in reply to: ahmed4J6T4

Meter/CM is not a problem, you can setup units and sub-units in your dimstyle,

https://help.autodesk.com/view/ACD/2023/DEU/?guid=GUID-6CF94D5C-ADE0-46D8-8D41-C52B22C88603

 

 

but there is no real option for the mm5 feature.

 

 

-

 

Beside of all of ootb abilities, there are tool to fake such a dimension

Like CHBH and similar

 

 

 

Or bigger like Arcibem and some others

 

Or Applications like ArchDim

 

 

 

 

- Sebastian -
Message 3 of 4
vladimir_michl
in reply to: ahmed4J6T4

You can try the following settings for the dimension style:

https://www.cadforum.cz/de/hochgestellte-architekturbemassung-nach-din-1356-tip8490

Not 100%, but close.

 

Vladimir Michl, www.arkance-systems.cz  -  www.cadforum.cz

 

Message 4 of 4
Kent1Cooper
in reply to: ahmed4J6T4

This has come up before.  I didn't look into them, but check the topics found >here<.

Kent Cooper, AIA

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Customer Advisory Groups


Autodesk Design & Make Report