Free rotation via X- and Y-axis in 3D model area

[bigcarl5000kg]

For all objects in the 3D model area, there is no full possibility of rotation in this working space. The are lot of limitations.

Example (shaded mode) - for this standard case is:

- the rotation via X-axis not possible (blocked)

- the rotation via Y-axis limited to +/-90° only

- only the rotation via Z-axis possible in the full range 

 It doesn't matter if I use rotation via SHIFT+Mouse, 3Dorbit, ...  always the same problem.

The free rotation in each axis is the BASIC function of all other 3D CAD (Inventor, SolidWorks, Catia,...) ... and here it works.

[AVCPlugins]

Rotation of individual objects is done with the rotate3d command or better with GIZMO.
But you seem to be confusing object rotations with view direction changes. To change the view, use Shift+ Middle Mouse Button (that is, you need to hold down Shift and the mouse wheel and move the mouse). 

I didn't notice any restrictions, but now you've noticed and I've noticed that I can't actually scroll the view a few full rotations at a time. However, more is never required in life. And you can continue driving if you release the buttons and press them again.

[bigcarl5000kg]

Hi @AVCPlugins ,

I know all the possibilities to change the rotation in the view, but I have the same problems as above described with the devices as SpaceMouse Enterprise. It doesn't matter if it's a manual rotation or through the device. The user does not have all degrees of freedom.