dwg file convert so i can 3d model it

mcnicollchris · ‎02-17-2022

hi there ive been sent a dwg file of some cam rockers and im looking for some hep in making the file into a solid to potentially start with a 3d model then maybe even out to Gcode for the mill

thanks in advance

j.palmeL29YX · ‎02-18-2022

There are missing some (a lot) information to create a 3D-model based on this 2D-geometry. These 2D views are not complete (and seem to be incorrect too). 😞

Jürgen Palme
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

mcnicollchris · ‎02-18-2022

ah right, the lad i got them from said he reckons he could pull the geometry etc in autocad lt? im new to this so dont have any ideas yet.

j.palmeL29YX · ‎02-19-2022

Without correct views and the missing information (see the commented attachment) it is impossible to generate a 3Dmodel. Ask the sender for a correct 2D file. The current one consists only of contradictions 😞

Jürgen Palme
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.