Drawing Scales added automatically to template drawing
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Denunciar
Hello all
I have a dwt drawing for our structural designers with a small number of drawing scales imbedded on the template, and on 10 out of 12 installations every time you start a new drawing from that dwt the scales shown on "Template as it should.jpg" shown below are the ones available as it should be. ![]()
The problem happens only on 2 machines that every time you start a drawing from the same dwt there are a series of scales automatically added and altered to that drawing before you start anything, as shown below on "Added to Template file.jpg".
What is going on with these 2 machines?
I have noticed that on the 2 problematic machines the Edit Drawing Scales window show a different description of the scales (note the highlight 1:5 on both attachments are 1 paper unit=5 drawing units and the wrong one shows 1 paper unit=0.005 Meters).![]()
I would like to believe this is something related to a system variable but can't find anything on my research. How can the same dwt file behave differently on different machines? ![]()
I would appreciate any clues from the clever people on this forum.
CheersAdded to template file
Template as it should