Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Dimensioning text doesn't display!

Anonymous

Dimensioning text doesn't display!

Anonymous
No aplicable

Hi,

 

The dimensioning text doesn't display when I add a dimension. It only displays an empty textbox when I add a dimension. The same happens when I use DTEXT or MTEXT. Please see the attached file. The frame around the text option is unchecked.

 

Any help would be much appreciated.

 

 

 

0 Me gusta
Responder
Soluciones aceptadas (2)
523 Vistas
4 Respuestas
Respuestas (4)

ennujozlagam
Mentor
Mentor
Solución aceptada

hello, have you check your DIMSTYLE setting,

or QTEXT set to OFF. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Me gusta

Anonymous
No aplicable

Thanks for your help. I simply set the QTEXT to OFF and it worked.

0 Me gusta

ennujozlagam
Mentor
Mentor
Solución aceptada

hello, try in QTEXT first > in the command prompt type Qtext and set to OFF and see if solve your issue. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Me gusta

ennujozlagam
Mentor
Mentor

no worries, glad to help. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Me gusta