Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

CAD 3D Corner Piece

Dsavvy
Explorer

CAD 3D Corner Piece

Dsavvy
Explorer
Explorer

Anyone know how I can make this 3D piece with a 90° corner return? Basically a molding wrapped around a corner

Dsavvy_0-1656464648871.png

 

0 Me gusta
Responder
Soluciones aceptadas (3)
461 Vistas
5 Respuestas
Respuestas (5)

Kent1Cooper
Consultant
Consultant

SLICE a 45° wedge off the end.  MIRROR in an appropriately defined UCS.  UNION if you want.

Kent Cooper, AIA
0 Me gusta

Dsavvy
Explorer
Explorer

No idea how to slice a 45° angle :cara_sonriente_con_la_boca_abierta_y_los_ojos_cerrados:. Can you show me please? I attached it

0 Me gusta

Patchy
Mentor
Mentor
Solución aceptada

Make 2 pieces and put together at 90 degrees, draw 2 lines at 45 degrees and use them as cutting plane to slice.

Pick end points of one line and 1 end point of the other line.

slice.JPG

corner.JPG

0 Me gusta

j.palmeL29YX
Mentor
Mentor
Solución aceptada

>>Click<< 

or 

>>Click<< 

 

 

 

Jürgen Palme
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

0 Me gusta

Kent1Cooper
Consultant
Consultant
Solución aceptada

It can be done easily enough without actually drawing Lines for the purpose.  Either by setting a UCS or by 3D Rotating in the WCS, get to the point where the Z axis aims upward from the top:

Kent1Cooper_0-1656503689747.png

In PLAN view so that you're looking down from above:

Kent1Cooper_1-1656503920713.png

SLICE

{select the 3D Solid, Enter to complete selection}

{pick some point A}

@Anonymous,10 {to get point B -- does not need to be beyond the other side, but anywhere in 45° relation to A}

@0,0,1 {third point for Slicing plane}

{pick to the right to keep that part}

Kent1Cooper_2-1656504142984.png

MIRROR

{you know what to do}

Kent Cooper, AIA
0 Me gusta