Blocks palettes and inserting on a specific layer

[Lazy-Arquitecto]

Hi,

I wonder if it is possible to insert blocks from Blocks palettes on a specific layer. I know this is possible using the tool palette but is this also possible using blocks palette?

thank you

[Valentin_CAD]

@Lazy-Arquitecto ,

Are you referring to this article?

• About Layer 0—Controlling Colors and Linetypes of Blocked Objects

Consider reading this link: About the Blocks Palette

[Lazy-Arquitecto]

No, i want to insert block from the new blocks palette and keep the layer of my block as is on my library. For instance when inserting a door, it should insert in A-DOOR. Is this possible from blocks palette? or only from tool palette?

[pendean]

ToolPalettes do that if you set it up to do it that way. Change your command usage.
LISP customization ca do that too.

The Block Palette is not a replacement for any other method or option, it's just an extra tool. If you'd like to suggest new abilities for it, do so here https://www.autodesk.com/company/contact-us/product-feedback

HTH

[Valentin_CAD]

@Lazy-Arquitecto ,

---

@Lazy-Arquitecto wrote:

No, i want to insert block from the new blocks palette and keep the layer of my block as is on my library. For instance when inserting a door, it should insert in A-DOOR.

---

If your blocks are assigned to the correct layer, then use the DESIGNCENTER and "Create Tool Palette of Blocks" from library folder.  I recommend you see the video and link:

• Tool Palettes: Exploring the Features and Benefits of AutoCAD