BASE VIEW ISSUE

[Anonymous]

I Have an imported model which I am selecting a few 3D bodies in BASE view,

when the BASE view is projected to an isometric a HUGE elipse circle appears right through the view,

any ideas how to remove this?

I have attached the drawing, the error is shown on layout 3

George Abbott

[john.vellek]

HI @Anonymous,

I am afraid your attachment did not stick. Can you try again perhaps using a different browser? From your description, this is something I don't believe I have seen before.  Please tell me your AutoCAD version too so I can use the same to test your file.

Please select the Accept as Solution button if my post solves your issue or answers your question.

[Anonymous]

Hi,

i think the model is attached now.

i have also attached a PDF which shows you a screen shot of the issue.

thanks

[Anonymous]

Hi,

i think the model is attached now.

thanks

[Anonymous]

I forgot to mention, the model is AutoCAD 2018

[john.vellek]

HI @Anonymous,

I copy/pasted your geometry into a new drawing.  Then, I moved all the geometry close to 0,0 as your original location was extremely far away form this origin.  When I project the views they now show up correctly. Can you try this too and let me know if it works for you too?

Please select the Accept as Solution button if my post solves your issue or answers your question.

[Anonymous]

John,

I used CTRL+C and then CTRL+V into a new drawing and then insertion point 0,0, the error still occurred.

is this the correct process?

[john.vellek]

Hi @Anonymous

That sounds right but I noticed that your model is still a block so I exploded it and then everything projects properly.  I have attached my file for you to try as well.

Please select the Accept as Solution button if my post solves your issue or answers your question.

[john.vellek · Accepted solution]

Hi @Anonymous

I am checking back to see if my post helped you with your problem or question. Please mark a post or posts as accepted solutions if they resolved the issue or give me a bit more detail on this issue so we can continue to work towards getting this solved.

Please hit the Accept as Solution button if a post or posts solves your issue or answers your question.

[Anonymous]

Hi John,

sorry i have been out of office today.

this issue was resolved.

thanks