Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

AutoCAD - when line crosses another line autocad attaches them together

hits4200
Contributor

AutoCAD - when line crosses another line autocad attaches them together

hits4200
Contributor
Contributor

for example if i draw a circle and then draw a line from the center of the circle outwards past the edge then autocad connects them together. i cant move them independently of each other. Any help would be appreciated.

 

[ The subject line of this post has been edited to include the product name by @handjonathan ]

0 Me gusta
Responder
Soluciones aceptadas (1)
357 Vistas
6 Respuestas
Respuestas (6)

pendean
Community Legend
Community Legend
Share that DWG file with the line/circle that are permanently attached please, lets see your work for ourselves to try and help you decipher it.
0 Me gusta

hits4200
Contributor
Contributor

Thank you Pendean appreciate your time. The circle and the line are not connected but if you select just the line it moves the circle to. Just cant figure this one out.

0 Me gusta

RSomppi
Advisor
Advisor

I cannot recreate your issue but have you tried setting FSMODE to 0?

0 Me gusta

hits4200
Contributor
Contributor
yes, it is off. this is a weird one not doubt.
0 Me gusta

pendean
Community Legend
Community Legend
Solución aceptada

@hits4200 wrote:
yes, it is off. this is a weird one not doubt.

Here is your issue

pendean_0-1665425867689.png

 

You need to remove the Parametric Constraints you turned on https://knowledge.autodesk.com/support/autocad/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-t...

 

 

hits4200
Contributor
Contributor

Thank you so much!!!!!!! constraintinfer value set was set to 1. Put it on 0 and solved the problem.