Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Autocad stops responding when editing the file

Anonymous

Autocad stops responding when editing the file

Anonymous
No aplicable

Hi,

 

I'm desperate.

 

I started working with Autocad only couple of months ago with version 2015. Creating a new .dwg file works just fine but after edited file exceeds a certain amount of lines/details/younameit Autocad turns really slow and when I continue editing it finally stops responding completely. Then there's nothing I can do anymore. I have re-created same drawings from point zero and done several tricks I've found on these pages but none of them has helped. 

 

I have a new computer with enough processor and memory capacity so it shouldn't be the issue. Also the files are pretty small (only nx100 kt). I attached one of the problematic files.

 

Thanks in advance,

 

BR, Henna

0 Me gusta
Responder
Soluciones aceptadas (1)
467 Vistas
4 Respuestas
Respuestas (4)

neaton
Advisor
Advisor

@Anonymous wrote:

Hi,

 

I'm desperate.

 

I started working with Autocad only couple of months ago with version 2015. Creating a new .dwg file works just fine but after edited file exceeds a certain amount of lines/details/younameit Autocad turns really slow and when I continue editing it finally stops responding completely. Then there's nothing I can do anymore. I have re-created same drawings from point zero and done several tricks I've found on these pages but none of them has helped. 

 

I have a new computer with enough processor and memory capacity so it shouldn't be the issue. Also the files are pretty small (only nx100 kt). I attached one of the problematic files.

 

Thanks in advance,

 

BR, Henna


When a file starts behaving oddly I always AUDIT then save and close the file then RECOVER the file and see if that helps.

0 Me gusta

Anonymous
No aplicable

Hi,

 

Thank you for the answer. I've tried that but it doesn't help :cara_de_decepción:

 

BR, Henna

0 Me gusta

Alfred.NESWADBA
Consultant
Consultant
Solución aceptada

Hi,

 

if you select all objects you'll see symbols like that:

 

2016-01-04 11-42-44.png

 

That means you have defined a lot of constraints and these constraints can sometimes make a system slow, and the more exist, the more chance the recalculation slows your system down to inaccessibility.

 

As the used constraints are in most cases of type "perpendicular" I guess you didn't meant to use them during construction, more like "it just happend" :cara_guiñando_un_ojo:

To solve that

  • first turn off the automatic creation of the constraints using sysvar CONSTRAINTINFER (>>>details<<<)
  • in the current drawing delete all the constraints created using command _DELCONSTRAINT ==> _ALL

 

HTH, - alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2025
------------------------------------------------------------------------------------

(not an Autodesk consultant)
0 Me gusta

Anonymous
No aplicable

Thank you Alfred!

 

I figured it had something to do with settings and I tried to delete constraints manually, but clearly it didn't go that well. Thanks for the control functions! I was already planning to hit the wall with my laptop.

 

Have a great new year!

 

BR, Henna

0 Me gusta