Community

Autocad Publish wont use current profile

Autocad Publish wont use current profile

Shay.Gaghe
Advocate Advocate
260 Views
1 Reply
Message 1 of 2

Autocad Publish wont use current profile

Shay.Gaghe
Advocate
Advocate
‎08-24-2021 01:20 AM

hi

 

something really weird happened. im using 2 different profiles in Autocad, when i use Publish, the plotted PDF didn't use the current profile, but the one that wasn't been used. i could see it since it couldn't find some fonts.

 

any idea?

 

Using Autocad 2018, Autocad Architecture.
Please accept as solution if i solved your problem
0 Likes
Like
Report
261 Views
1 Reply
Reply (1)
Message 2 of 2

ennujozlagam
Mentor
Mentor
‎08-24-2021 01:25 AM

you can refer to this LINK and see if helps. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Likes
Like
Report
Report a website issue