Community
AutoCAD Forum
cancel
Showing results forย 
Showย ย onlyย  | Search instead forย 
Did you mean:ย 

AutoCAD file running extremely slow

4 REPLIES 4
SOLVED
Reply
Message 1 of 5
Anonymous
629 Views, 4 Replies

AutoCAD file running extremely slow

Anonymous
Not applicable

Hi,

I'm new to AutoCAD, I generally use Fusion 360 for 3D modeling.

I'm facing an issue with AutoCAD while 3D modeling, my file was running very smooth in the beginning but now it became very slow and I can't even use the PressPull command.

I don't know what the exact problem is, I never faced such a problem with Fusion 360.

Please help me, I'm attaching the file (please ignore my stupid design mistakes, its incomplete ๐Ÿ˜…)

Thank You! ๐Ÿ˜Š 

0 Likes

AutoCAD file running extremely slow

Hi,

I'm new to AutoCAD, I generally use Fusion 360 for 3D modeling.

I'm facing an issue with AutoCAD while 3D modeling, my file was running very smooth in the beginning but now it became very slow and I can't even use the PressPull command.

I don't know what the exact problem is, I never faced such a problem with Fusion 360.

Please help me, I'm attaching the file (please ignore my stupid design mistakes, its incomplete ๐Ÿ˜…)

Thank You! ๐Ÿ˜Š 

Labels (3)
4 REPLIES 4
Message 2 of 5
Alfred.NESWADBA
in reply to: Anonymous

Alfred.NESWADBA
Consultant
Consultant
Accepted solution

Hi,

 

if you change the layer of these objects and freeze the layer then the file performance raises, _PRESSPULL works then with normal speed.

 

20210407_114853_0001.png

Also having all on layer "0" does not make the job easier, you can't freeze the layers of objects you don't need for the current operation which slows you down.

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2024
------------------------------------------------------------------------------------

(not an Autodesk consultant)

Hi,

 

if you change the layer of these objects and freeze the layer then the file performance raises, _PRESSPULL works then with normal speed.

 

20210407_114853_0001.png

Also having all on layer "0" does not make the job easier, you can't freeze the layers of objects you don't need for the current operation which slows you down.

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2024
------------------------------------------------------------------------------------

(not an Autodesk consultant)
Message 3 of 5
imadHabash
in reply to: Anonymous

imadHabash
Mentor
Mentor

Hi,

it will be resolved if you delete the arrayed objects . this is why it's extremely slow . 

 

Imad Habash

EESignature

Hi,

it will be resolved if you delete the arrayed objects . this is why it's extremely slow . 

 

Imad Habash

EESignature

Message 4 of 5
Anonymous
in reply to: Alfred.NESWADBA

Anonymous
Not applicable

Thank You very much!

Your solution really worked. Thanks a lot.

0 Likes

Thank You very much!

Your solution really worked. Thanks a lot.

Message 5 of 5
Anonymous
in reply to: imadHabash

Anonymous
Not applicable

Thank You so much for your reply but, I need that object I can't delete it. Freezing worked for me but, is there any alternative for array objects?

0 Likes

Thank You so much for your reply but, I need that object I can't delete it. Freezing worked for me but, is there any alternative for array objects?

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

AutoCAD Inside the Factory


Autodesk Design & Make Report