Announcements

Starting in December, we will archive content from the community that is 10 years and older. This FAQ provides more information.

Community
AutoCAD Forum
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Autocad color changes in drawing into another

5 REPLIES 5
SOLVED
Reply
Message 1 of 6
arunag
593 Views, 5 Replies

Autocad color changes in drawing into another

Dear experts,

Autocad on my computer is showing different colors on drawing area and on properties or layer manager.

If cyan is chosen in layer properties, by layer followed, it displays yellow in drawing.

All colors are different, shows correctly in properties or layer manager, but draws different color on model space. What could be the reason. Please help.

Aruna
School of Architecture
Ramaiah Institute of Technology
Bangalore
5 REPLIES 5
Message 2 of 6
Alfred.NESWADBA
in reply to: arunag

Hi,

 

which version of AutoCAD (command _ABOUT) and which graphic card (command _GRAPHICSCONFIG)

 

Also please try with command _GRAPHICSCONFIG to turn off hardware acceleration ... better?

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2024
------------------------------------------------------------------------------------

(not an Autodesk consultant)
Message 3 of 6
vinodkl
in reply to: arunag

select all (ctrl+a) and use the command "SETBYLAYER" to set the color of the object as per the layer.

If this doesn't solve your problem please post a screenshot or attach the drawing so that we can help.

--------------------------------------------------------------------------------------------------------------------------
ವಿನೋದ್ ಕೆ ಎಲ್( System Design Engineer)



Likes is much appreciated if the information I have shared is helpful to you and/or others.

Please mark "Accept as Solution" if my reply resolves the issue or answers your question, to help others in the community.
--------------------------------------------------------------------------------------------------------------------------
Message 4 of 6
imadHabash
in reply to: arunag

Hi,

i'm afraid that your drawing elements are NOT bylayer colored !!! you may need to check that ? can we have A CAD drawing sample please ? 

 

Imad Habash

EESignature

Message 5 of 6
arunag
in reply to: Alfred.NESWADBA

Yes it worked after acceleration got off. Thanks.
Aruna
School of Architecture
Ramaiah Institute of Technology
Bangalore
Message 6 of 6
Alfred.NESWADBA
in reply to: arunag

Hi,

 

>> Yes it worked after acceleration got off.

In that case you either need updating AutoCAD and/or the graphic card driver (that's why I was asking for details about AutoCAD version and graphic card information).

 

But good to know we found the source of the issue!

 

- alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
ISH-Solutions GmbH / Ingenieur Studio HOLLAUS
www.ish-solutions.at ... blog.ish-solutions.at ... LinkedIn ... CDay 2024
------------------------------------------------------------------------------------

(not an Autodesk consultant)

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

AutoCAD Inside the Factory


Autodesk Design & Make Report