Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

AutoCAD - Can't Region this Object

Gokul.h
Contributor

AutoCAD - Can't Region this Object

Gokul.h
Contributor
Contributor

Can't Region this object. Is there any other way?

I need this object to be Region without Flatten.

Any replies and solution is much appreciated! 

 

Gokulh_0-1664608937175.png

 

[ The subject line of this post has been edited to include the product name by @handjonathan ]

0 Me gusta
Responder
Soluciones aceptadas (1)
510 Vistas
6 Respuestas
Respuestas (6)

SEANT61
Advisor
Advisor

A region has to be a planar object.  A surface (Loft) may get you where you need to go.


************************************************************
May your cursor always snap to the location intended.

j.palmeL29YX
Mentor
Mentor
Solución aceptada

See >>this<< first suggestion. 

 

 

[EDIT]

Some seconds later: 

Or this better and >>more simple<< way.

 

 

 

 

 

If my reply solves your problem, click the "accept as solution" button. This can help others find solutions faster

Jürgen Palme
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Gokul.h
Contributor
Contributor

First of all, I'll extremely appreciate your effort for this clear video with each clear command's explanation.

Thank you so much J.Palme! You did a great work! 

But So it is not possible to use "Region command" on this object?

I'll ask the user about this Loft Command method which you used then let you know soon.

If this method solves user issue, then I'll click "accept as solution" immediately.

Thanks again! I too learned the loft command method today from you because of that video.

Have a Sweet day! 

 

j.palmeL29YX
Mentor
Mentor

@Gokul.h wrote:

 

But So it is not possible to use "Region command" on this object?

 

 


Definitely NO. As @SEANT61 wrote above, a Region is per definition a planar object. And your linework describes not a planar shape.  

 

Since we don't know what the result is needed for and what precision is required, here are >>two more ways<< to create this shape.
If you analyze the results carefully, you will see that all 4 variants differ a little bit in detail. You (the user) have the choice ...  :cara_guiñando_un_ojo: 

 

 

Jürgen Palme
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Gokul.h
Contributor
Contributor

Thanks for your Info SEANT61!

I'll appreciate it!

0 Me gusta

Gokul.h
Contributor
Contributor

Thanks again J.Palme! 

User accepted your loft method. So, the issue solved now :cara_que_sonríe_con_ojos_sonrientes::cara_que_sonríe_con_ojos_sonrientes:

0 Me gusta