Community
AutoCAD Forum
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

AutoCAD 2022 Slow Panning and Performance

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
Anonymous
1170 Views, 3 Replies

AutoCAD 2022 Slow Panning and Performance

Anonymous
Not applicable

AutoCad 2022LT has been running very sluggishly for me even when in a simple CAD file.  This is killing my workflow. I'm not super technical so any help in a simplified format would be greatly appreciated! 

0 Likes

AutoCAD 2022 Slow Panning and Performance

AutoCad 2022LT has been running very sluggishly for me even when in a simple CAD file.  This is killing my workflow. I'm not super technical so any help in a simplified format would be greatly appreciated! 

3 REPLIES 3
Message 2 of 4
ennujozlagam
in reply to: Anonymous

ennujozlagam
Mentor
Mentor

you can refer to these LINK and LINK and see if helps. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Likes

you can refer to these LINK and LINK and see if helps. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Message 3 of 4
vinodkl
in reply to: Anonymous

vinodkl
Mentor
Mentor
Accepted solution

Hi @Anonymous 

 

Type in the command "3DCONFIG" and try turning ON the "Hardware acceleration". If its already turned ON, then type in the command "DYNMODE" and set it to "1".

--------------------------------------------------------------------------------------------------------------------------
ವಿನೋದ್ ಕೆ ಎಲ್( System Design Engineer)



Likes is much appreciated if the information I have shared is helpful to you and/or others.

Please mark "Accept as Solution" if my reply resolves the issue or answers your question, to help others in the community.
--------------------------------------------------------------------------------------------------------------------------

Hi @Anonymous 

 

Type in the command "3DCONFIG" and try turning ON the "Hardware acceleration". If its already turned ON, then type in the command "DYNMODE" and set it to "1".

--------------------------------------------------------------------------------------------------------------------------
ವಿನೋದ್ ಕೆ ಎಲ್( System Design Engineer)



Likes is much appreciated if the information I have shared is helpful to you and/or others.

Please mark "Accept as Solution" if my reply resolves the issue or answers your question, to help others in the community.
--------------------------------------------------------------------------------------------------------------------------
Message 4 of 4
Anonymous
in reply to: Anonymous

Anonymous
Not applicable
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" /><meta name="Generator" content="Microsoft Word 15 (filtered medium)" /><!--<br>/* Font Definitions */<br>@font-face<br> {font-family:"Cambria Math";<br> panose-1:2 4 5 3 5 4 6 3 2 4;}<br>@font-face<br> {font-family:Calibri;<br> panose-1:2 15 5 2 2 2 4 3 2 4;}<br>/* Style Definitions */<br>p.MsoNormal, li.MsoNormal, div.MsoNormal<br> {margin:0in;<br> font-size:11.0pt;<br> font-family:"Calibri",sans-serif;}<br>a:link, span.MsoHyperlink<br> {mso-style-priority:99;<br> color:blue;<br> text-decoration:underline;}<br>.MsoChpDefault<br> {mso-style-type:export-only;}<br>@page WordSection1<br> {size:8.5in 11.0in;<br> margin:1.0in 1.0in 1.0in 1.0in;}<br>div.WordSection1<br> {page:WordSection1;}<br><br>
0 Likes

<meta http-equiv="Content-Type" content="text/html; charset=utf-8" /><meta name="Generator" content="Microsoft Word 15 (filtered medium)" /><!--<br>/* Font Definitions */<br>@font-face<br> {font-family:"Cambria Math";<br> panose-1:2 4 5 3 5 4 6 3 2 4;}<br>@font-face<br> {font-family:Calibri;<br> panose-1:2 15 5 2 2 2 4 3 2 4;}<br>/* Style Definitions */<br>p.MsoNormal, li.MsoNormal, div.MsoNormal<br> {margin:0in;<br> font-size:11.0pt;<br> font-family:"Calibri",sans-serif;}<br>a:link, span.MsoHyperlink<br> {mso-style-priority:99;<br> color:blue;<br> text-decoration:underline;}<br>.MsoChpDefault<br> {mso-style-type:export-only;}<br>@page WordSection1<br> {size:8.5in 11.0in;<br> margin:1.0in 1.0in 1.0in 1.0in;}<br>div.WordSection1<br> {page:WordSection1;}<br><br>

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

AutoCAD Inside the Factory


Autodesk Design & Make Report