Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

angle with tab

e.alshayb
Community Visitor

angle with tab

e.alshayb
Community Visitor
Community Visitor
so when I drow a line then I need to just click the tab then will be able to change the angle
I try to do this but did not work at the school PC 
but on my PC, I can do that 
0 Me gusta
Responder
2.180 Vistas
3 Respuestas
Respuestas (3)

ChicagoLooper
Mentor
Mentor

Sorry I don't understand. Do you mean you want to enter an angle like the one you've highlighted in blue? If that's what you want to do, then hit F12.

 

Hitting F12 will give you the white 'box' where you can enter an angle.

 

If that's not what you want, then please explain again. 

Chicagolooper

EESignature

0 Me gusta

leeminardi
Mentor
Mentor

It sounds like you may need to set dynmode  to 1 to enable the tab key to put you into the length-angle mode of entering a coordinate.  

lee.minardi
0 Me gusta

ennujozlagam
Mentor
Mentor

just press F12 in your keyboard and you can key-in your desire angle? thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
0 Me gusta