Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

ALIGN command dosen`t works for imported pdfs

kubastan89
Collaborator

ALIGN command dosen`t works for imported pdfs

kubastan89
Collaborator
Collaborator

Hi,

I imported PDF file using PDFIMPORT command and then I want to scale the pdf using original coordinates with ALIGN command.

I choose first and second source and destination point, continue and allow to scale it and it dosen`t transport the drawing to proper location.

I marked the coordinates with pink circles. X coordinate starts with 7.... and Y starts with 5......

Please have a look why ALIGN command dosen`t work properly. 

0 Me gusta
Responder
Soluciones aceptadas (1)
509 Vistas
6 Respuestas
Respuestas (6)

imadHabash
Mentor
Mentor

Hi,

 

your elements too far from 0,0,0 .... would you try to move it near to 0,0,0 then see if any changes.some times (almost) when you work too far from 0,0,0 such a problems will appear. 

 

Regards,

Imad Habash

EESignature

Vinayv4v
Advisor
Advisor

Hi,

 

I am getting the correct co-ordinates when aligning.

 Align.JPG

 

Cheers,

Vinay Vijayakumaran

kubastan89
Collaborator
Collaborator

Hi,

Please have a look at recorded screencast:

https://knowledge.autodesk.com/community/screencast/72180268-4c45-448a-897b-6c64e1f2378e

Still I get incorrect coordinates.

0 Me gusta

Vinayv4v
Advisor
Advisor

Hi,

 

Can you please attach the pdf so that I could give it a try.

Cheers,

Vinay Vijayakumaran

0 Me gusta

Vinayv4v
Advisor
Advisor
Solución aceptada

Hello,

 

I am getting the correct result when aligning.

 

But when I turned on the Dynamic Input (as shown in your screencast) I am getting the same result as you get. (Getting wrong coordinates)

 

Turn off the DYNAMIC INPUT (F12) and and give it a try.

 

You will get the correct result.

 

1.JPG

Cheers,

Vinay Vijayakumaran

0 Me gusta

kubastan89
Collaborator
Collaborator

Strange things :cara_con_la_lengua_fuera:

After implementing your suggestions I got the correct results. Thanks a lot.