acore.dll

[Anonymous]

i cant start autocad 2016 because of this  "The procedure entry point euwmvmkwkkqozxafwpje could not be located in the dynamic link library C:\ProgramFiles\AutoDesk\AutoCAD 2016\accore.dll." what can i do?

[Emmsleys · Accepted solution]

Hi @Anonymous

Have you applied all service packs? 

I would suggest reading over the following article on "Troubleshooting when AutoCAD does not open" and try the suggestion steps. 

*Please select"Accept as Solution" if my post resolves your issue, or reply with additional information if the problem persists.* 

Thanks. 

[Anonymous]

thanks for your help but it didn´t work i tried everything but nothing happened i have windows 10 and autocad 2016

[Emmsleys · Accepted solution]

@Anonymous 

• Does this happen for all windows user profiles, or only one?  For instance, if you log on as a different windows user, does the issue still happen?
• When was the last time you were able to start AutoCAD? 

As a test try the following; 

1. Uninstall/ Re-install Microsoft C++
2. Uninstall/ Re-install Microsoft .NET
3. Uninstall/ Re-install AutoCAD
4. Diagnostic Boot (video) (work on a few drawings in this environment, you will need to BORRROWLICENSE before you do so. Make sure you are not connected to the Internet or the network) 

[Emmsleys · Accepted solution]

@Anonymous 

Following up on this thread, I haven't heard back if you were able to try the suggested steps. 

Please post back in the thread if you are still having an issue with AutoCAD the community and myself will be more than happy to help.