Anuncios

The Autodesk Community Forums has a new look. Read more about what's changed on the Community Announcements board.

Paper space and model space object scale issue.

CoryBriz
Participant

Paper space and model space object scale issue.

CoryBriz
Participant
Participant

I am new to using layouts for my drawings. 

 

My problem is when in my model drawing i have a whole plan w/ multileaders and when I look at the drawing in my layout they are all gone?

 

Also my line type scales are all messed up?

 

Im sure this is a easy fix, but some help would be much appreciated! Thanks

 

 

0 Me gusta
Responder
709 Vistas
9 Respuestas
Respuestas (9)

maxim_k
Consultant
Consultant
Hi,

If you don't see some objects in the Viewport in the Layout at first verify that all layers are turned in and not frozen in this Layout.
About Linetype scale issue: which value has PSLTSCALE system variable in the Layout?

You can also attach your problem drawing - I'll look at it.

Maxim

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community
0 Me gusta

CoryBriz
Participant
Participant
Thanks for the reply, the layer for the multileader text is on and not frozen but still is not showing. also, how do you post screen shots to the forum


Thank You!

Cory Brizendine

Cell: 619-606-4662

WEB: westpointcustomhomes.com

WEST POINT CUSTOM HOMES
0 Me gusta

maxim_k
Consultant
Consultant
Take screenshot, than attach it to the post.
The issue with multileaders could be related also to Annotative scale feature
https://knowledge.autodesk.com/support/autocad/getting-started/caas/CloudHelp/cloudhelp/2016/ENU/Aut...

Maxim

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community
0 Me gusta

CoryBriz
Participant
Participant
Great! so I changed the Multileaders Annotative to Standard and it fixed the issue. Thank you. My only other issue is the line type scale is different from model to my layouts. I have a dotted line that is perfect in my model and its a solid line in my layouts??


Thank You!

Cory Brizendine

Cell: 619-606-4662

WEB: westpointcustomhomes.com

WEST POINT CUSTOM HOMES
0 Me gusta

maxim_k
Consultant
Consultant
I already asked you:
About Linetype scale issue: which value has PSLTSCALE system variable in the Layout?

Maxim

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community
0 Me gusta

CoryBriz
Participant
Participant

Its 1

0 Me gusta

CoryBriz
Participant
Participant

Are you asking me what the value is? Not sure how to check which value has PSLTSCALE system variable in the layout... where do I look for that? and do I need to check if its the same in model?

0 Me gusta

maxim_k
Consultant
Consultant
Try to set PSLTSCALE to 0 (zero):
While in the paper space in the Layout type at the command prompt PSLTSCALE, hit Return, than type 0 (zero) and Return again.
Now use REGENALL command to see the results.

Maxim

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.


Maxim Kanaev
Architect
MARSS

MacACAD | Linkedin

Etiquette and Ground Rules of Autodesk Community
0 Me gusta

Emmsleys
Alumni
Alumni

Did any of the posts in the thread help with the issue? 

Please use the 
Accept as Solution for those post’s that helped. It may benefit other users who might have a similar question or issue.


Thanks for your time. 



Sarah Emmsley
Technical Support Specialist

0 Me gusta