Help, when entering coordinates...

[mcamachof1900]

I need to create a graph and when entering the coordinates an error occurs when pasting them in the console the following happens

Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: 0,0
Command:
_HELP
Command: 0.6,8
Unknown command "6,8". Press F1 for help.
Command:
HELP
Command: 1.5,17
Unknown command "5,17". Press F1 for help.
Command:
HELP
Command: 2.4,27
Unknown command "4,27". Press F1 for help.

[maxim_k · Accepted solution]

Welcome to Autodesk Forums!

Hi @mcamachof1900 ,

Before pasting (entering) coordinates to the Command window, you need to start drawing command, such as LINE or PLINE:

Command: LINE
Specify first point: 0,0
Specify next point or [Undo]: 0.6,8
Specify next point or [Undo]: 1.5,17
Specify next point or [Close/Undo]: 2.4,27
Specify next point or [Close/Undo]:
Command: