Unhandled exception E06D7363 (e06d7363h) at address FD67B16Dh

[lukasz.badowski]

Hello,

Using ACADE 2016, I get this error when I try insert circuit using Circuit Builder.

When I tray do it in default WDDEMO project, all it's OK.

Anyone can help with this please ?

Thank you,

Lukasz

[jaya_priya_ramasamy · Accepted solution]

Can you check your library settings?

Normally the circuit builder templates are found in the following paths based on the standards. So you can choose one library path based on your project standard choosen. If you want JIC standard, please make sure that the path C:\Users\Public\Documents\Autodesk\Acade 2016\Libs\jic125 is added under the Schematics Libraries in the project properties. Then you can try to use circuit builder and check.

Let me know whether this solves your issue.

[lukasz.badowski]

Hi,

First I used Reset Settings to Default function in my AcadE 2016 and next I used Migration Utility, because my project was created in AcadE 2015 and it helps.

Thank you for response.

lukasz.badowski

[jaya_priya_ramasamy]

Good to know the procedure you have followed and solved the issue. Thankyou for your reply.