Solved: Relay Coil Cross Reference Number Text Small

Anonymous · ‎07-07-2020

Having issues with my relay coil cross references. The number text comes in extremely small and I have no idea where to change this. Any help?

JeffatPrimex · ‎07-07-2020

Not sure what you consider small from your image it looks normal to me. If you plan on changing it the attributes just for the reference number are shown below. Backup always and if this block is an issue then most likely the reset will be as well therefore you may want to look into the Modify Symbol library tool under components menu.

Again Backup backup backup first.

Best regards,

Jeff

Anonymous · ‎07-07-2020

I was able to fix this by changing a variable line in my environment file. I had changed it thinking it was the text height, but it's actually a ratio. So I just the value from .07 to 1. However, if you wanted the pins to show small then .5 or .75 would be good. I believe the default is 0.67?

*SETQ:GBL_wd_xref_mtext_pinsize,"0.07" changed it to *SETQ:GBL_wd_xref_mtext_pinsize,"1"

https://knowledge.autodesk.com/support/autocad-electrical/learn-explore/caas/CloudHelp/cloudhelp/201...