I have a design profile and now I want to create one that's linked to it but have it 0.5m lower than the profile I just laid out. Is there a way to do this? I'd like to keep them dynamically linked so when i manipulate the 1st profile it will drop the 0.5m lower profile. In theory this would be a great feature to have in CIvil 3D. I'm just not sure it's been built into the software at this point. Thanks.
At this point I will likely need to copy the profile and drop it 0.5m in elevation with edit geometry. Not ideal considering when I adjust the main profile I'll need to redo that process to show the profile 0.5m lower than my main design profile. (used as a side slope target).
Solved! Go to Solution.
Solved by Jeff_M. Go to Solution.
This is not something built in to C3D just yet. It IS something available available in a 3rd party app if that would interest you. http://www.quuxsoft.com/SincpacC3D_Help/SP_DLThreeLineProf.htm
Does this run in 2012, 2013, and how long do they take to get this into a current version considering 2014 is only a few months away. Thanks.
There are versions for C3D 2007-2013. With the exception of SincpacC3D 2013, all were ready within weeks of the base C3D release (we start working on support as soon as we get a copy of the software from ADN). 2013 was delayed a few months due to a number of changes made to how we communicate with C3D, AutoCAD, and .NET in general. We don't anticipate any major issues moving on to 2014.
@LeafRiders wrote:<snip>....considering 2014 is only a few months away. Thanks.
Pretty ballsy with all the bellyaching I'm hearing about 13
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.