Invalid overhang

[Anonymous]

Getting the message when reloading an xref "Result may be incorrect due to invalid overhang.1"  What does this mean?

[Victoria.Studley · Accepted solution]

Hi @Anonymous,

It sounds like there is a problem with one of the edge styles in your drawing.

Could you attach it here so that we can try to reproduce the error? (You may need to zip it up with Xrefs as well, since you mentioned there are Xrefs involved.)

You may need to locate the problematic object and recreate the object and/or its edge style that is causing the problem.

If one or more of these posts helped answer your question, please click Accept as Solution on the posts that helped you so others in the community can find them easily.

[Victoria.Studley]

Hi @Anonymous,

I'm just checking in again to see if you need more help with this.

• Will you be able to attach the problematic file here for analysis?
• Were you able to narrow down the object/style that is causing the error?

If one or more of these posts helped answer your question, please click Accept as Solution on the posts that helped you so others in the community can find them easily.