Community Modernization Project – Communications - Updated 5/22/2025

[CGBenner]

Hello Community. 

We are starting this new thread as a place for us to share communications with the Community as the Community Modernization Project progresses.  As of this posting, all new announcements and communications will be shared here in this thread, including links to supporting documents.  The comments will be disabled on this thread only to keep it clean and easy for all of you to follow. 

We encourage your continued comments and feedback in the original Community Announcements feedback thread, or on any of the Product blog posts that we will be linking to in this thread.  As always, the Feedback Form that was shared in the original feedback thread can be used to report specific issues or suggestions.  These are all being read, collated and prioritized so keep them coming.  We cannot make any promises that any suggested changes or features will be implemented, but your feedback is none the less being considered.

As of this posting we are anticipating a new release to be coming soon and will share a link to the release blog post here in a reply to this thread.  I suggest, if you want to follow this as it progresses, that you subscribe to this thread and check back often to see any new updates.

Thank you for your patience as we worked through the first stages of this project and the subsequent communications plan.

[CGBenner]

Community Redesign – Product Blogs - Updated 5/28/2025

To bring this thread up to date on the Modernization Project blog posts so far, here is a list of the posts through April 4, 2025

• Community Redesign - Updates Since Launch - 12/06/24
• Community Redesign – New Releases & Office Hours Recap For This Week. – 12/12/24
• Community Redesign – Final office hours for the year – 12/20/24
• Community Redesign – Modernizing the Autodesk Forums – 01/10/25
• Community Redesign - February Release - 02/11/25
• Community Redesign - Update on Progress for Reported Issues - 04/04/25
• Community Redesign - April Release: Industry Hubs are live! - 05/07/25
• Community Redesign - May Release: We´re making important behind-the-scenes updates to the Autodesk C...
• Community Redesign - May Release: Migration Updates and what to expect this week - 05/22/25
• Community Redesign - May Release: Final Migration Round and what to expect this week - 05/28/25
  

As new releases and accompanying blog posts are shared by the Product Team, we will share those here in this thread as new posts.  Comments are welcome on the blog posts themselves, or in the Community Announcements Feedback thread linked in the top post of this thread.

[Tarek_K]

Hello everyone!

A new blog post has been released regarding the Community Redesign and the upcoming updates to the community. You can find the blog post here:

• Community Redesign - February Release - 02/11/25
  
  

Have a good read, everyone! 

[CGBenner]

Autodesk Community Product Team Office Hours

The Autodesk Community Product Team Office Hours are an opportunity to connect directly with the Community Product Team & UX designers—not just to discuss the redesign, but also to share any challenges you're facing with the community.

Please register for these events using the links in the upcoming dates, as space will be limited:

March 11, 9:30-10:30AM PDT

March 13, 2-3PM PDT

March 17th, 9:30AM-10:30AM PDT

March 25, 2-3PM PDT

April 1, 9:30-10:30AM PDT

Office Hours beyond April 1 have been discontinued for the time being - please visit the latest Community Product Team Blog post for more information.

Thank you!

[CGBenner]

Hello Community!

A new blog post has been released with updates on the Community Redesign project, including a look at the feedback you all have shared.
You can find the blog post here:

• Community Redesign - Update on the feedback shared - 02/21/25

Have a good read, everyone!

[CGBenner]

Hi ,

We regret to inform you that due to an unexpected medical emergency, we are unable to hold the Autodesk Community Team office hours scheduled for today. We sincerely apologize for any inconvenience this may cause.

We greatly value your interest and participation in our events, and we invite you to register for the next office hours session on April 1st. You can find the registration link HERE.

Thank you for your understanding and support. We look forward to connecting with you at the next session.

Best regards,
The Autodesk Community Team

[Tarek_K]

Hi all,

We just updated the thread and linked the latest blog post on the upcoming behind-the-scenes updates to the Community. Dont miss out on that one >>HERE<< ! 🙂 

[Tarek_K]

Hi all,

The thread has just been updated with the latest link to the blog post! It will cover more behind-the-scenes updates. All the information you can find here!

[Tarek_K]

Hi all,

and another update has hit the road. You can find the information of the final stages of the community migration here. 

[Tarek_K]

Hi all,

quick update - the last 5 boards are currently undergoing the migration which are the ones as following. 

• Civil 3D Forum
• Fusion Design Validate & Document Forum
• AutoCAD Forum
• Revit Architecture Forum
• Inventor Forum

The last board inventor forum is expected to complete migration, but it runs a bit longer than expected; it should be completed around Wednesday morning.

[Tarek_K]

Hi all,

The last three forums are being migrated which are the ones below. This should be completed by tomorrow, which then concludes the migration. 🙂 

• AutoCAD Forum
• Revit Architecture Forum
• Inventor Forum