Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
The bevel cut function (see screenshot below) works on concrete beams but does not work on concrete footings or slabs, most clients I show the concrete functions to ask if they can chamfer the edges of the footings as thats how they are made and need to show like that on the GA drawings
I found the only way to create a bevel or chamfer on a footing was to place a Square bar on the corner at the desired angle and measurements. Then using the element contour function cut the block away, creating the bevel.
Hi @Anonymous you can use the polygon contour function and draw a triangle, that will give the chamber, this is a lot more work than the bevel cut function.
