abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Connection Macros recognising the Main and Secondary members for bolt orientation.

Connection Macros recognising the Main and Secondary members for bolt orientation.

Connection Macros recognising the Main and Secondary members for bolt orientation.

We would like to see connection macros recognising the ‘Main’ and ‘Secondary’ members for the bolt orientation, and the option to always orientate the bolt head on the Secondary member, rather than inverted and non-inverted bolts. This would reduce the need for multiple joint boxes of the same connection with different bolt orientations. This would also fix the macros where the bolts default to the cleat rather that the secondary member. (i.e. purlin lap macro).  

1 Kommentar
bigcarl5000kg
Advisor

Some macros / tools orient the screws according to the current UCS, some depending on whether you select the first part in the back or in the front. Try it and see if it works.

 

Also, the orientation of the screw in connected 2 assemblies indicates which assembly the screw belongs to.

Can't find what you're looking for? Ask the community or share your knowledge.

Idee einsenden  

Autodesk Design & Make Report